Programmable automatic stator end coil lace machine Single working
This stator coil end lacing machine is especially applied to multi
sizes, low output or more lead stator winding lacing. Stator is
loaded on this coil lacing machine vertically. The lacing wokring
process, such as single-needle and single-side automatic lacing;
needle transpositioning, hooking, are all controlled by servo
system. Machine is PLC programming, with an inverter drive and can
be fully programmed to suit different stator slot configurations.
The lacing type, like slot by slot lacing, intercal lacing, and
fancy lacing could be set in the touch srceen.
|Statro OD||less than 190mm|
|Stator lamination height||40-160mm|
|Max winding height||60MM|
|Lacing mode||slot by lsot/interval slot/fancy lacing|
This machine is suitable for stator used in induction motor
industry. This lacing manchine is especially applied to multi
sizes, low output or more lead stator winding lacing.
Information needed for stator lacing machine inquiry
It will be better if customer could send us detailed drawing
including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stator winding drawing
5. Other technical requirement
If possible, it will be better if customer can send us samples.
1. This machine is PLC programming.
2. Machine Model number: BXIW1-260/300.
3. The tooling is movable, and convenient for stator fast laoding and
4. This machine is horizontal frame-structure.
5. The stator OD ranges from 175~300mm.
6. The tooling is movable, and convenient for stator fast laoding and
Stator made by this lacing machine