Middle size stator winding automatic lacing machine for single
1. The stator coil lacing machine is controlled by servo system.
2.PLC and touch screen control the lacer equipment.
3. The stator lacing machine is characterized by compact
appearance, fast speed and low noise.
4. This stator lacing machine will automatically feeding and
cutting and lacing.
5. Double needles lacing the overhang winding each side
This lacing machine is equipped with pressing, automatic feeding,
automatic cutting device. The stator should be loaded vertically
into this lacing machine. The overhang windings are simultaneously
laced by two twin needles controlled by servo system. The needle
indexing, hooking and stator indexing process are controlled by
servo system. The spindle adopts frequency speed control. The
lacing type, such as slot by slot lacing, interval lacing, and
fancy lacing could be programed in the touch screen. This lacing
machine is characterized by compact appearance, fast speed, low
noise; simple operation and easy tooling change.
This machine is appropriate for micro induction motor like
conditioner motor, washer motor, compressor motor, fan motor,
alternator motor, pump motor etc.
This machine is consist of machine body, needle, nozzle rotating
part, needle fore and back movement,nozzle swing part, needle up
and down movement part, stator indexing part,thread feeding,thread
Lacing machine technical data
|Min. stator ID||33mm|
|Max. stator OD||150mm|
|Stator stack length||15~120mm|
|Pitch time||About 0.5~0.7sec/slot|
|Dimension||1570 x 670 x 1680mm|
Variety of application, easy operation.
We have Overseas Service Center.
Machine is controlled by PLC. All the parameter can be set in the
It is suitable for stators with different model number and
The operation and tooling change process is easy.
We could customize machine for our customer as per their
We directly supply our machines to many countries, like USA,
France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.
This machine is controlled by PLC. All the parameter could be set
on the touch screen,
Lacing machine operation method
1. Connect machine to power source and air source. Do threading.
2. Put the stator in the tooling.
3. Switch to "auto" mode. The press "start" button by two hands.
4. Machine will automatically do the lacing.
Machine detail picture